SYK-3 Hot Shoe Flash Light Remote slave Trigger - intl | Image source: Lazada
Detail produk dari SYK-3 Hot Shoe Flash Light Remote slave Trigger - intl
SYK-3 Flash Remote Controller
This Hot Shoe Flash Remote Slave Trigger has a sensor to sense light from the master flash so as to trigger the slave flash wireless.
1. Introduction
The SYK-3 flash remote controller is harnessing optical theory making the master flasher to control remotely the auxiliary one to flash synchronously without the need of connecting wires. It features small in volume, good-looking in exterior, high inflexibility and stable in performance, it can also artificially create different kinds of effect and take special photos.
2. Technical Performance
1) Distance of remote control: L=master flasher index/2
(The above formula will be established when the face receiving the light of the flash remote controller is aiming mutually at the illuminating face of the signal flasher and when the two are on a same level).
2) Structure
A flasher standard socket is seated at the top part with a fixed nut on the bottom surface.
Specifications
Quantity: SYK-3 Flash Remote Controller x1
Brand new, never used
Suitable For
Hot-shoe Flashgun
Note:
this adapter don't fit CANON TTL flash
(example 580EX/EXII 430EX/EXII)
Note:this adapter don't fit Sony and Minolta flash
Notice:The main flash to trigger this device must be a manual flash,or switch your TTL flash to manual mode. if not,the sync speed only can reach 1/25s,when you use the camera build-in pop-up flash,the sync speed also will not be faster than 1/25s.
Spesifikasi SYK-3 Hot Shoe Flash Light Remote slave Trigger - intl
SKU | DS776ELAACQBQZANID-28350581 |
English highlights |
|
Model | SYK-3 |
English description |
SYK-3 Flash Remote Controller
This Hot Shoe Flash Remote Slave Trigger has a sensor to sense light from the master flash so as to trigger the slave flash wireless.
1. Introduction
2. Technical Performance
Specifications
Suitable For Hot-shoe Flashgun this adapter don't fit CANON TTL flash
Notice:The main flash to trigger this device must be a manual flash,or switch your TTL flash to manual mode. if not,the sync speed only can reach 1/25s,when you use the camera build-in pop-up flash,the sync speed also will not be faster than 1/25s.
|
Tipe garansi | No Warranty |
Tidak ada komentar:
Posting Komentar